Range 12 volts - 800 VA
              24 volts - 1400 VA
                          48 volts - 200VA, 3000VA

FEATURES:

• Microcontroller based design with DSP technology.
• PWM Sinewave Output.
• SMPS based battery charger, charges battery from 110V.
• Selectable charging current and voltage.
• Complete O/L and Short ckt. Protection with facility to run highly Inductive Loads.
• Automatic overload reset.
• Protection against abnormal temperature rise.
• Can accept any input waveform like sine wave, square wave, generator etc.
• Automatic low battery warning and cut off.
• FUZZY LOGIC Battery charging control.
• Closed loop regulated Sinewave output from no-load to full load.
• DC 3” Fan (12,24,48V) control on PCB.

Specifications :-

• Range Available:- 800VA / 12V, 1400VA / 24V, 2000VA and 3000VA / 48V.
• AC Input :- 100 to 285V AC (175 to 270V in Home UPS mode).
• Output Voltage Range :-225V AC nominal (backup mode).
• Output Frequency:-50 ± 0.1 Hz.
• Output Waveform:- Pure Sine Wave.
• Transfer Time :- @30m Sec. in Inverter mode.
  <10m Sec.in Home UPS mode.
• Display :- LED (Mains, Inverter, Charge, O/L, B/L) (Fuse blown, Hot condition).
• Battery Charger Range :- 115 to 275 V AC.
• Battery Charging Current:- 8 / 11 Amp. DC.
• Battery Boost Voltage :- 13.8 / 14.2 Volts ± 0.1V.
• Battery Low Off :- 9.6 Volts ± 0.2V.
• Overload :- Trip after 10 seconds. Four retries.
• Jumper Selections :- Mode, Charging Amp / Boost Voltage.